the fabric

Agora 3D

Three dimensions

A double fabric that combines our 100% solution-dyed acrylic guarantee with a polyester base that gives the fabric structure solidity. The top layer acts as a protective barrier against the weather and sun radiation. High quality polyester yarns are the connection between the two layers, giving it thickness, recovery power, and breathability.

3D 1360

70% Solution Dyed Acrylic 30% PES
Ref: 1360
Ref: 1361
Ref: 1366
Ref: 1362
Ref: 1363
Ref: 1364
Ref: 1365

Technical data

Composition 70% Solution Dyed Acrylic 30% PES
Width 190cm
Weight 510g/m2
Length of rolls 30ml
Finish Water repellent. Anti-stain treatment
Colour fastness to light 7/8 UNE EN ISO 105-B02:2014
Colour fastness to artificial weathering 4/5 UNE EN ISO 105-B04:1998
Colour fastness to chlorinated water 5/5 UNE EN ISO 105-E03:2010
Ultraviolet Protection Factor UPF 50+ AZ/NZS 4399/1996
Slippage resistant Warp 2,4 mm - Weft 2,0 mm
UNE EN ISO 13936-2:2004
Tensile strength Warp 900N - Weft 650N
UNE EN ISO 13934-1:2013
Abrassion resistance (Martindale) 30000 UNE EN ISO 12497-2:2016
Shrinkage to washing Warp -1’5% - Weft 0%
UNE EN ISO 5077:2007


Agora® fabrics can be washed simply with water in most cases, but remember that the most stubborn dirt can be removed with common household cleaning products, including bleach. Fast drying and wrinkle resistant, our fabrics will look like new for years.


Recommended uses


The Agora warranty covers abnormal fabric damage due to fading or resistance loss under normal conditions of exposure, including sun, mould, rot and chemicals in the atmosphere in general, provided the fabric has been correctly installed, used and maintained. The installation work of the distributor is not covered by the warranty. The warranty does not cover damage due to misuse, accidental burns, negligence or piercing. Waterproof and FR treatments: Recommended for cushions and upholstery only. Make sure the laminated side is on the inside and do not expose it to the sun or to poor weather.